Thermometer Accessories
Bellco Glass, Inc. Rtd temperature sensor fits into a Thermowell to register the temperature of the media inside a vessel. This sensor connects to a temperature controller with solenoid valve to activate either a heating blanket for heating or a coil for cooling.
Rtd temperature sensor fits into a Thermowell to register the temperature of the media inside a vessel. This sensor connects to a temperature controller with solenoid valve to activate either a heating blanket for heating or a coil for cooling.
Cole-Parmer Type-J, Hypo Tip Probe, 4" L, Mini-Connector, .063" Dia, Grounded , 5ft Coil Cord
Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C). Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.
Essendant Adams Multi-Part Guest Check Pad, Two-Part Carbonless, 3.38 x 6.38, 50 Forms Total
A service-industry standard Adams Multi-Part Guest Check Pads are ideal for capturing your guests food and beverage orders Perforated at top with consecutive numbering each check features plenty of space to capture the menu selections as well as the server table and number-of-guests details Carbonless multipart format allows you provide a copy to your guest or kitchen while keeping clean copies for your records Handy wraparound cover can be placed between sets as you fill out a check to prevent write-through Rigid backing provides a stable writing surface Form Type Details- Guest Check Dated/Undated- Undated Forms Per Page- 1 Form Size- 3 38x6 38
American Diagnostic Corporation ADTEMP TYMPANIC PROBE CVR 40PK
This item has a minimum qty of 19 per supplier requirements.
Microsolv Technology Corporation Caps, Screw Top, Solid PTFE with thinned penetration area. "Knurled" Translucent Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
This low-extractables, PTFE Cap is chosen when Polypropylene and Silicone Rubber cannot be used in your analysis.
Essendant Parker Refill for Parker Ballpoint Pens, Medium Conical Tip, Blue Ink
Refill your PARKER Ballpoint Pen with vibrant QUINKflow ink Featuring a smooth easy-writing style the rich ink captures your thoughts brilliantly Each refill is engineered for reliable writing performance Use ink refills to replace existing PARKER ballpoint pen refills or simply swap out the refill to change your ink color Refill Format- Standard Ballpoint Refill For Series- Parker Ballpoint Pens Refill Ink Color- Blue Color Family- Blue
Cole-Parmer Bendable RTD Probe, 100 Ohm, 5-ft Coil Cable; 10" L
Maximum error for probe assembly is 1.1C + 0.12% of reading below 300F, 0.35% of reading above 300F. Alpha coefficient is 0.003850 //C (DIN IEC 751). Resistance at ice point (0C) is 100 . Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five. Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C).
Cole-Parmer Digi-Sense Compact RTD Probe, 100 Ohm, 3-Pin. 1.5" L, 5ft SS Braid Cable
RTD bendable probes are designed to measure temperature in a confined space.Maximum error for probe assembly is 1.1C + 0.12% of reading below 300F, 0.35% of reading above 300F. Alpha coefficient is 0.003850 omega/omega/C (DIN IEC 751). Resistance at ice point (0C) is 100 omega.
Cole-Parmer Type-J, Small-Diameter Standard Probe, Mini-Connector, 4" L, .063 Dia, Grounded
Note the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C).